CAUTION:

ELECTRIC SHOCK

HAZARD

Disconnect unit from electric power before cleaning.

CAUTION:

BURN HAZARD

Allow unit to cool completely before cleaning.

IMPORTANT: DO NOT spill, splash or pour water into controls, kettle receptacle, heat lamp socket or wiring.

IMPORTANT: DO NOT use steel wool or abrasive cleansers for cleaning the cabinet.

PREPARATION

Turn ON/OFF switch “OFF

 

Allow unit to cool completely before cleaning

 

Disconnect unit from electric power before

 

cleaning

FREQUENCY

Daily, or as needed

TOOLS

Mild Detergent, Soft Cloth or Sponge

 

Plastic Scouring Pad

CLEANING

1.Disconnect unit from electric power and allow to cool completely before cleaning.

2.Shake all debris from kettle. Remove drop door. Scoop all product from cabinet and discard. Empty crumb tray.

3.Disconnect kettle plug from twist lock receptacle. Tilt kettle fully vertical and lift off of kettle hangers.

4.Wipe inside and outside of kettle with a sponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

NOTE: Baked on deposits may be removed with a plastic scouring pad. DO NOT submerge kettle, kettle cord or kettle plug in water.

5.Disassemble stirrer, then slide kettle lid off of stirrer shaft. Wipe lid and stirrer components with a sponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

6.Wipe inside and outside of cabinet, drop door and crumb tray with

asponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

NOTES:

a.Use care when cleaning doors to prevent scratching.

b.Do not wipe heat lamp if it is hot.

c.Use care that no water is splashed into kettle receptacle or heat lamp socket.

7.Reinstall kettle lid. Reassemble stirrer, then reinstall kettle. Reinstall drop door, then slide crumb tray in place.

Procedure is complete.

232 306223 Owners Manual WPP-Series Popcorn Popper

6

Page 8
Image 8
Wells WPP-6 owner manual Frequency

WPP-6 specifications

The Wells WPP-6 is a cutting-edge unmanned aerial vehicle (UAV) designed to meet the diverse needs of modern surveillance and reconnaissance missions. This versatile drone stands out with its innovative technology and robust features, making it a popular choice among military and civilian operators.

One of the primary characteristics of the WPP-6 is its compact design, allowing for easy transport and rapid deployment in various environments. The drone’s lightweight construction, combined with durable materials, ensures high performance while maintaining resilience against harsh conditions. Its aerodynamic shape contributes to enhanced flight stability and efficiency, enabling long-duration missions.

The WPP-6 is powered by an advanced electric propulsion system that offers quiet operation and minimal thermal signature, a crucial advantage for covert operations. This system not only extends flight endurance but also provides the flexibility to operate in various flight regimes. The drone typically boasts a flight time of over six hours, depending on payload and operational conditions.

Equipped with state-of-the-art sensors, the WPP-6 excels in reconnaissance and intelligence-gathering tasks. Its high-definition cameras, thermal imaging sensors, and advanced stabilization technology enable real-time data collection and accurate target identification. Additionally, the drone can be outfitted with various payloads to support specific mission requirements, from electronic warfare systems to environmental monitoring tools.

In terms of navigational capabilities, the WPP-6 features an integrated GPS system, allowing for precise positioning and automated flight paths. The drone supports both manual and autonomous operation modes, providing users with flexibility in mission planning and execution. Its advanced flight control systems facilitate easy handling, even in challenging environments.

The WPP-6 excels in communication, employing secure data links to transmit information in real-time to ground control stations. This ensures that operators have immediate access to critical data for tactical decision-making. Furthermore, the drone can operate beyond visual line of sight (BVLOS), expanding its operational range significantly.

In summary, the Wells WPP-6 combines advanced technology, exceptional versatility, and user-friendly operation, making it an outstanding choice for a wide array of aerial missions. Its robust features, high endurance, and superior sensor capabilities reflect Wells’ commitment to innovation in the UAV domain, catering to both military and commercial applications. Whether deployed for surveillance, reconnaissance, or data collection, the WPP-6 stands as a testament to the evolving landscape of drone technology.