6.See the left inset drawing. Identify the outer side of the remaining Frame Spacer (79).
Hold the Frame Spacer (79) between the Left Upright (77) and the Lift Frame (65), with the outer side of the Frame Spacer facing the Left Upright. Attach the Left Upright to the Lift Frame with a 3/8" x 2 1/2" Bolt (1), a 3/8" Washer (10), and a 3/8" Nut (13); do not tighten the Bolt yet.
7.Have a second person hold the console assem- bly near the Right Upright (78).
Connect the wire harness on the console assem- bly to the Upright Wire (74) as shown in the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT
CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER.
Remove the wire tie from the Upright Wire (74).
6 | 77 |
|
|
| |
| 13 |
|
| 79 |
|
1 | 10 |
|
65 |
| |
|
| |
79 | Outer | 77 |
| Side | 13 |
| 1 | 10 |
| Inner | 79 |
| 65 | |
| Side |
|
7 | Console Assembly | |
| ||
Wire
Harness
74
78 | Wire |
| Tie |
74 
9
