7.Attach the Latch Bracket (77) to the Left Upright (9) as shown with two 3/4” Screws (70).
Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown. Insert the pin into the Latch Bracket (77), and tighten the knob back onto the pin.
7
| Knob |
| 70 |
| 77 |
| 70 |
Large | Collar |
Hole |
|
9 | Pin |
| Spring |
8.Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 16). To protect the floor or carpet, place a mat under the treadmill.
9
