Weslo WLHS86090 manual shell. Before filling the spa, make sure it is in the

3. Wipe the spa shell clean with a damp cloth. Remove

the two warning decals (not shown) from the spa

shell. Before filling the spa, make sure it is in the

exact position you want. Also make sure the spa

can be easily serviced, if needed. Once the spa

is filled with water, it must be drained to be

moved.

Fill the spa by using a garden hose or other clean

water source. Do not use soft water. The water

temperature does not matter; however, if you use

warm or hot water, the spa will be ready to use

sooner. Fill the spa until the water covers the filter

assembly by approximately one inch. Do not overfill

the spa.

4. Attach the nozzle of an air pump (not included) to

3Fill to Here

the valve on the Inflatable Cover (4) and fill the

Inflatable Cover with air. Do not overfill the

Inflatable Cover.

4

Loop 4

Cut-out Buckle

Slide one of the straps on the inside of the Spa

Cover (11) through one of the loops on the Inflatable

Cover (4). Attach the latch on the strap to the buckle

on the other end. Make sure the cut-out on the

Inflatable Cover is lined up with the warning

label on the Spa Cover. Attach the other three

straps on the inside of the Spa Cover (11) through

the loops on the Inflatable Cover (4) in the same

manner. Place the Spa Cover (11) over the spa and

line up the cut-out in the Inflatable Cover with the

Console.

5. See the inset drawing. Position one of the Buckles

(30) on the wood panels on the spa unit. Hold the

Buckle in place so the strap on the Spa Cover (11) is

tight. (Note: It may be easier to position the Buckle if

a second person holds the strap on the opposite

side of the Spa Cover tight.) The Spa Cover must

be tight. Do not place the Buckle over one of the

grooves in the wood panels. Remove the latch.

Attach the Buckle to the side of the spa with two #4

x 3/4Ó Screws (31). Note: It may be helpful to use

a drill with a 1/16Ó drill bit to make starter holes

in the wood panels. You may also want to apply

a little soap or wax to the screw threads.

Attach the other five Buckles (30) to the spa unit in the same manner.

Remove the Spa Cover (11) and Inflatable Cover (4) from the spa unit.

	Strap
	Latch
11
	Warning
	Label
5	Strap
11	Latch
	30
	31
	30

9