2.Attach the Handrails (69) to the Upright (73) with four M10 x 45mm Screws (2). Start all four
Screws, and then tighten them.
3.With the help of a second person, hold the con- sole assembly near the Upright (73). Remove the tie from the Upright Wire (71).
Connect the Upright Wire (71) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Insert the connectors and the excess wire into the crossbar on the Upright (73).
2 |
|
2 | 69 |
| 69 |
| 2 |
| 73 |
3 | Console Assembly |
|
Console Wire 71 
73
Tie
Console
Wire
71
7
