West Bend Infrared Toaster instruction manual Using Your Toaster, Basic

Models: Infrared Toaster

1 24
Download 24 pages 3 Kb
Page 5
Image 5
USING YOUR TOASTER

USING YOUR TOASTER

Before using, wipe outside of toaster with a damp soapy cloth, and then dry thoroughly. Operate the toaster the first time without any food in the toaster slots and with the browning setting set to the darkest setting. This will eliminate any residual manufacturing oils.

Basic

1.Place toaster on a dry, level, heat-resistant surface, away from any edge or flammable materials.

2.Plug cord into 120 volt AC outlet only.

3.Place up to two slices of bread, bagels, English muffins, pastry slices (1 piece in each slot), etc., into bread slots.

4.Select toast color setting from 1st LED light (light) to 6th LED light (dark). Note: Toaster pastries, tarts and the like can ignite if over-heated. Toast at the lowest/lightest setting with constant attention. Never toast any filled or frosted pastries or the like more than once.

5.Press the toast lever down until it locks into place. Toasting cycle will automatically begin. Please note: Toaster must be plugged in for toast lever to lock in place. Toast will automatically pop up and toaster will turn off when the selected color is reached. The toast cycle can be stopped any time by pressing the cancel button. Note: Do not attempt to dislodge food when toaster is plugged in.

6.Unplug the cord from wall outlet when not in use and allow to cool before cleaning.

Bagel Setting: The bagel setting automatically turns off the outside toasting element for each pair of slots. The cut-side of the bagel will be toasted when placed toward the inside of the slots. To use, press toast lever down and press the bagel button. The bagel indicator light will illuminate when activated.

Defrost Setting: The defrost setting will take the bread/frozen pastry from frozen to toasted in one step. To use, press toast lever down and press the defrost button. The defrost indicator light will illuminate when activated.

Cancel Setting: The cancel setting will immediately terminate the toasting cycle; the toast will pop up and the toaster will turn off.

Note: The above settings can only be activated after the toast lever is pushed down and locked.

Some smoke and/or odor may occur upon first heating due to the release of manufacturing oils – this is normal.

Some expansion/contraction sounds may occur during heating and cooling – this is normal.

5

Page 5
Image 5
West Bend Infrared Toaster instruction manual Using Your Toaster, Basic