| KNOW YOUR CAN OPENER |
Cutting |
|
Assembly |
|
Release Button |
|
Piercing Lever | Bottle Opener |
Magnetic Lid |
|
Holder |
|
Geared Wheel |
|
Knife Sharpener
Cord Storage
USING YOUR CAN OPENER
To open cans:
1.Place can opener on level surface.
2.Plug cord into electrical outlet.
3.Raise piercing lever.
4.Place rim of can firmly under can guide pin and against the geared wheel.
5.Press piercing lever all the way down.
6.The motor will begin turning can and cutting lid. (It is not necessary to hold the piercing lever down or to hold the can during the cutting action.)
7.The motor will automatically stop when the can is open.
8.Remove can from opener and check can contents to remove any pieces of label or metal shavings.
To sharpen knives:
1.Place cutting edge of knife in the knife slot located on the back of the can opener.
2.Draw the knife blade through the slot several times.
Always use care to direct blade away from yourself and others.
3.Clean knife after sharpening.
NOTE: Serrated blades should never be inserted into this unit.
4
