Enterprise Hard Drives

WD RE3 SATA Hard Drives
StableTrac The motor shaft is secured at both ends to reduce
system-induced vibration and stabilize platters for accurate
tracking during read and write operations. (750 GB and above)
RAFF — Our fourth generation RAFF technology includes
sophisticated electronics to monitor the drive and correct both
linear and rotational vibration simultaneously in real time for up to
a 60% performance improvement over the previous generation of
drives operating in high vibration environments.
IntelliSeek Calculates optimum seek speeds to lower power
consumption, noise, and vibration in active seek modes without
degrading performance.
Multi-axis shock sensor — An additional third sensor has been
added to automatically detect subtle high frequency shock events
in all axis enabling compensation to protect the data.
RAID-specific, time-limited error recovery (TLER) — Prevents
drive fallout caused by the extended hard drive error-recovery
processes common to desktop drives.
Third generation dynamic fly height — Each read-write head’s
fly height is adjusted in real time for optimum reliability.
NoTouch ramp load technology — The recording head never
touches the disk media ensuring significantly less wear to the
recording head and media as well as better drive protection in transit.
Perpendicular Magnetic Recording (PMR) — WD RE3 drives
utilize PMR technology to achieve even greater areal density,
reliability, and design margin.
5-year limited warranty

Key Features Key Specifications

Interface: SATA 3 Gb/s
Form Factor: 3.5-inch
Spin Speed: 7200 RPM
Cache: 16 MB or 32 MB
Limited Warranty: 5-year

Capacities

250 GB, 320 GB, 500 GB,
750 GB, 1 TB

Model Numbers

WD2502ABYS, WD3202ABYS,
WD5002ABYS, WD7502ABYS,
WD1002FBYS
Western Digital, WD, the WD logo, and Put Your Life On It are registered trademarks in the U.S. and other countries; IntelliSeek, StableTrac, RAFF, and NoTouch,
are trademarks of Western Digital Technologies, Inc. Other marks may be mentioned herein that belong to other companies. Pictures shown may vary from actual
product. Not all products may be available in all regions of the world. All product and packaging specifications subject to change without notice.
© 2008 Western Digital Technologies, Inc. All rights reserved.
As used for storage capacity, one megabyte (MB) = one million bytes, one gigabyte (GB) = one billion bytes, and one terabyte (TB) = one trillion bytes. Total
accessible capacity varies depending on operating environment. As used for transfer rate or interface, megabyte per second (MB/s) = one million bytes per
second, and gigabit per second (Gb/s) = one billion bits per second. 2178-701099-A01 Ltr Aug 2008