Troubleshooting
No power
•Make sure DC cord is plugged into the back of the LCD Monitor.
•Make sure AC power cord is srelycuconnected to the AC socket
•Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage
No Image
•Make sure power button is ON.
•Check whether the LCD monitor and computer power cords are plugged in and whether there is a supply of power.
Power is ON but no screen image
•Adjust brightness and contrast
•Check signal connection properly seated both on PC and Monitor.
“Out Of Range”
•Check the computer image output resolution and frequency and compare the value with the preset values of graphics card.
Fuzzy Image
•Adjust Phase.
Image to Bright or to Dark
•Adjust brightness and contrast by OSD.
•Irregular Image
•Check the signal connection between the computer and LCD monitor.
•Perform Auto Adjust.
Distorted Image
•Reset the LCD monitor. (Perform the “Recall” function by OSD)
•Take off extra accessories (such as signal extension cord).
Image is not centered. Size is not scaled correctly
•Perform Auto Adjust
•OSD Image Menu to adjust H. Position and V. Position.
•Check image size setting.
Colors are not correct.
•Use OSD Color Menu to adjust color setting.
No sound
•Check your audio connection
How do I mount the LCD Monitor on a wall
•Use the 75mm VESA hole pattern to secure mounting plate to the LCD Monitor.
•Use professional installation to reduce risk of injury and damage
12
