Westinghouse LCM - 19v1 manual Installation, Attaching the Base Stand to the LCD Monitor

Installation

Congratulations on your purchase of a Westinghouse 19” LCD Monitor. Sleek and practical, this lightweight and wall-mountable LCD monitor delivers a crisp and clear display optimized for 1280 x 1024 display resolution.

Package Contents

•LCD Monitor (19”)

•Detachable Base Stand

•Cables

oDC Power Supply Adapter

oAC Power Adapter Cord

oVGA (HD15) Male – Male Cable

o3.5 mm Male – Male Stereo Audio Cable

•Literature

oUser’s Manual

oWarranty Card

1.Attaching the Base Stand to the LCD Monitor

Attach the base stand to the LCD monitor stand neck. Align the holes and tabs; press in and snap into place. To remove the base stand, press the tabs on the bottom of the stand neck and remove the base.

2. Connect the VGA and Audio Cables

Connect a VGA cable (to the connector labeled “D-SUB”) and an audio cable (to the connector labeled “AUDIO-IN”) from the back panel of the LCD monitor to your PC.

3. Connect Power Cables

Connect the DC power adapter cord to the LCD Monitor (to the connector labeled “DC-IN”) and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet.

4. Turn the Power On

Press the power button on the front of the LCD monitor. The LED light will turn green if a signal input is detected or it will be orange if no input is detected.

Auto Adjust

Although a computer can detect the new monitor with the built-in VESA Plug & Play feature, the Auto Adjust function can be used to enhance the display. To perform the Auto Adjust:

6

SE-UM-1901-0502