
SETUP MENUS
VIEW MODE
Use the View Mode
Press on the remote control or Menu on the control panel to display the setup menu screen then select View Mode to display the View Mode
View Mode
1:1 Mode | Standard | Fill | Overscan |
The following options are available:
•1:1 Mode: Matches the incoming resolution exactly to the pixels without any scaling.
•Standard: Picture is displayed in its original size.
•Fill: Picture is displayed to cover the entire screen.
•Overscan: Picture is scaled down to fit the display area.
Adjusting View Mode
1 Press the /
keys on the remote control to select the desired option.
2 Press or
to save and exit the screen.
VIEW MODE (VGA)
Select PC as your input source and use the View Mode
Press on the remote control or Menu on the control panel to display the setup menu screen then select View Mode to display the View Mode
The following options are available:
Aspect Ratio
Use this
•1:1 Mode: Matches the incoming resolution exactly to the pixels without any scaling.
•Standard: Picture is displayed in its original size.
•Fill: Picture is displayed to cover the entire screen.
English
33