UL-ES-RichboroSE-WH06

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TROUBLESHOOTING GUIDE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot

be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE

1.If fan does not start:

2.If fan sounds noisy:

3. If fan wobbles:

Touching

Ceiling

Figure 1

Blade Tip Down:

Fan Blade

Blade Brackets

Blade Tip Up:

Fan Blade

4. If light does not work:

SUGGESTED REMEDY

1.Check main and branch circuit fuses or circuit breakers.

2.Check wire connections as performed in step #15 or #16 of installation. CAUTION: Make sure main power is turned off.

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when switch is in the middle.

4.If the fan still will not start, contact a qualified electrician. Do not attempt to troubleshoot internal electrical connections yourself.

1.Check to make sure all screws in motor housing are snug (not over tightened).

2.Check to make sure the screws which attach the fan blade holder to the motor are tight.

3.If using an optional Ceiling Fan Light Kit, check to be sure the screws securing the glassware are finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists from glass, remove glass and install a 6mm wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.

4.Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.

5.Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear after this period.

All blades are weighed and grouped by weight. Natural woods vary in density which could cause the fan to wobble even though all blades are weight-matched. The following procedures should eliminate most of the wobble. Check for wobble after each step.

1.Check that all blades are screwed firmly into blade holders.

2.Check that all blade holders are tightened securely to motor.

3.Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

4.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades.Measure this distance as shown in Figure 1. Keeping measure within 3mm, rotate the fan until the next blade is positioned for measurement. Repeat for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the screw closest to the motor (Figure 2). To adjust a blade tip up, insert washer (not supplied) between the blade and blade holder at the two screws farthest from the motor (Figure 2).

5.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

1.Check to see that the wire connections in the switch housing are connected.

2.Check for faulty light bulbs.

3.If light kit will still not operate, contact a qualified electrician for assistance.

20

Page 20
Image 20
Westinghouse UL-ES-RichboroSE-WH06 owner manual Trouble, Suggested Remedy

UL-ES-RichboroSE-WH06 specifications

The Westinghouse UL-ES-RichboroSE-WH06 is a cutting-edge electrical product designed to enhance energy management and optimize electrical performance in various applications. With a combination of innovative technologies and user-friendly features, this device stands out in the competitive market of electrical solutions.

One of the main features of the UL-ES-RichboroSE-WH06 is its advanced energy monitoring system. This capability allows users to track energy consumption in real-time, providing valuable insights into usage patterns and facilitating informed decision-making for energy savings. The device is equipped with a user-friendly interface that displays essential data, making it easy for both residential and commercial users to understand their energy usage.

The UL-ES-RichboroSE-WH06 incorporates state-of-the-art communication technologies, including Wi-Fi and Bluetooth connectivity. This allows for seamless integration with smart home systems and other devices, enabling users to control their energy consumption remotely. Additionally, it is compatible with various mobile applications, making it convenient to monitor and manage energy use from anywhere at any time.

Another significant characteristic of this device is its robust safety features. The UL-ES-RichboroSE-WH06 is designed to meet stringent safety standards, ensuring protection against overloads, short circuits, and other electrical faults. This reliability is further enhanced by its durable construction, which ensures longevity and reduced need for maintenance.

Moreover, the unit is designed with energy efficiency in mind. Its intelligent load management system helps to distribute power effectively, reducing waste and contributing to lower energy bills. The UL-ES-RichboroSE-WH06 is also eco-friendly, as it supports sustainable practices by minimizing energy consumption without compromising performance.

In terms of versatility, the Westinghouse UL-ES-RichboroSE-WH06 is suitable for a wide range of applications, from residential homes to commercial establishments. Its adaptability makes it an ideal choice for those looking to enhance their energy management capabilities.

Overall, the Westinghouse UL-ES-RichboroSE-WH06 is an innovative solution that combines advanced technology, safety, and energy efficiency. It empowers users to take control of their energy consumption, making it a valuable addition to any modern electrical system. Hence, it addresses the growing demand for smarter, more efficient energy solutions in today’s world.