Electrical wiring 50 Hz
Case 1
The installation of electrical circuit jumpers is needed in certain input supply configurations.
Use uncut jumper as supplied in the case of an input supply wiring,
Case 3
Please note that in a
is required.
Case 2
In the case of an input supply wiring for a dual phase system 2 x 230 VAC (16 A max), you'll need to cut off a portion of the jumper piece.
Proceed as follows:
Use a pair of pliers to firmly hold the upper half of the metal jumper, then break off the other half.
Important!
Safely dispose of the discarded portion in accordance with the local waste disposal legislation in force.
14
