Generalcleaningand maintenance
1.Dust the front grille and side panels with a soft brush or the dusting attachment of your vacuum.
2.If cabinet paint chips, you can touch up the paint with a good grade enamel paint to prevent rust.
Waterbucketcleanin
Every few weeks, rinse the inside of the water bucket with a mild detergent to prevent growth
of mold, mildew and bacteria.
Cleaningtheinteriorcoil
For best efficiency, clean the coil at least once a year with the brush attachment of your vacuum. Be sure the coil is dry for easier cleaning.
Tool needed:
Phillips screwdriver
Removing front of dehumidifier:
Electrical Shock Hazard Unplug dehumidifier before cleaning.
Replace all panels before operating.
Failure to do so can result in I death or electrical shock.
1.Unplug dehumidifier or disconnect power supply.
2.Remove water bucket.
Fliliwhead
3.Remove 3 screws from each side of the front panel.
4.Remove the front panel by holding the bottom sides and lifting up and out. Do not remove top cover or cabinet.
5.Clean coils with brush attachment of your vacuum cleaner. Be careful - coil fins are sharp.
NOTE: The refrigerant coil is all that needs to be cleaned on the inside of the dehumidifier.
6.Replace the front panel and water bucket.
7.Plug in dehumidifier or reconnect power supply.
