Caring For Your Dehumidifier
Continued
l Remove the rear grille. Push top of grille down. When tabs release from cabinet, rotate grille toward you. Detach bottom of grille from cabinet mounting pins.
l Lift cabinet from base.
3. Remove filter from back of rear grille:
l Gently pull top of filter toward you until
|
| tabs release from grille. | |
|
| l Pull filter up and away from grille. | |
|
| 4. Clean filter with a vacuum cleaner or, if very | |
| Filter | dirty, wash with warm water and mild deter- | |
Rear | gent. Air dry thoroughly before replacing. | ||
| |||
|
|
5. Coils should be inspected annually. Brush clean, if necessary, with warm water and mild detergent. Rinse and dry thoroughly. Be sure power supply cord is disconnected from receptacle.
6. The compressor is sealed and needs no oiling. The fan motor is prelubricated and does not require further oiling under normal operating conditions. However, if the dehumidifier is operated under severe environmental conditions (dust, dirt, high temperatures) the fan motor should be oiled annually. Follow the instructions in step 5.
Fan | 7. Oil the motor through the tubes provided. Use | |
motor | ||
SAE #20 grade oil. | ||
oil | ||
|
hbeS
8.Wash plastic parts with a soft cloth, warm water and mild detergent. Rinse and dry with a soft cloth.
9.Replace cabinet, filter and grilles.
10.Reconnect power supply cord.
10
