Using the optional automatic ice maker
If your refrigerator has an automatic ice maker, or if you plan to add one later (contact the dealer for ice maker kit number), here are a few things you should know.
l The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically | ice maker. | |
UP to shut off the ice maker | ||
| ||
IMPORTANT: Do not turn ice maker on until you |
| |
connect it to the water supply. |
|
lIf you remove the ice bin, raise the signal arm to shut off the ice maker. When you replace the bin, push it in all the way and lower the ice maker signal arm to the ON position.
lIt is normal for ice crescents to be attached by a corner. They break apart easily.
l The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.
lIf ice is not being made fast enough and more ice is needed, turn the Refrigerator Control toward a higher number. Wait a day and, if necessary, turn the Freezer Control toward 5.
l Good water quality is important for good ice quality. Try to avoid connecting the ice maker to a softened water supply. Water softener chemicals (such as salt from a malfunctioning softener) can damage the ice maker mold and lead to poor ice quality. If you cannot avoid a softened water supply, make sure the water softener is operating properly and is well maintained.
Solving common ice maker problems
PROBLEM
Ice crescents attached at corners
Ice maker will not operate or ice is not made fast enough
POSSIBLE CAUSE/SOLUTION
l This is normal. They break apart easily. Shake bin occasionally to keep cubes separated.
l ON/OFF lever is in the OFF (up) position. Lower lever to the ON (down) position. l Freezer is not cold enough. Adjust temperature controls and wait 24 hours.
(See “Changing the control settings” on page 7.)
l New plumbing connections can cause discolored or
l Cubes are stored too long. Throw them away and make a new supply. l Food is not wrapped properly. See page 19.
l Freezer and ice bin need to be cleaned. See page 16.
l Water may contain minerals (such as sulfur). A filter may be required to remove them.
11
