Whirlpool 2221515 Door and Side Panels, Decorator Door Panel Kits, Cabinet Side Trim Kits, 32 cm

Opening Dimensions

NOTE: The water hookup and electrical outlet must be placed near the bottom of the refrigerator. The recommended grounded electrical outlet and water connection should be installed in the shaded area as shown. For specifications, see the “Electrical Requirements” or “Water Supply Requirements” section. If the recommended water line location is used, no additional plumbing needs to be purchased.

1				36"		1
				(91.5 cm)
		131/4"			161/2"
	(34 cm)				(42 cm)
2
			72"
			(182.9 cm)

121/2"	201/4"
(32 cm)	(51.5 cm)	2"
2"(5 cm)
		(5 cm)
3
21/2"	91/4"
(6.5 cm)	(23.5 cm)

1.Minimum fixed wall position

2.For full-overlay cabinet doors and a trim kit, the height of the opening must be 72¹⁄₈ in. (183.2 cm)

3.Recommended locations for electrical and water connections

Door Swing Dimensions

Location must permit doors to open to a minimum of 150°. Allow 13¹⁄₄ in. (33.7 cm) minimum space between the side wall and the freezer side of the refrigerator. Allow 16¹⁄₂ in. (41.9 cm) minimum space between the side wall and the refrigerator side.

NOTE: Dimensions may vary based on model.

		131/4"					161/2"
	(33.7 cm)				(41.9 cm)
			21/8"
			(5.4 cm)
413/4"				1/2"		1/4"		433/8"
(106 cm)				(12.7 mm)		(6.4 mm)		(110.2 cm)

90˚

150˚

Door and Side Panels

Factory Door Panels and Side Trim Kits

All factory parts are available through your Whirlpool dealer or by calling Whirlpool Parts and Accessories at 1-800-442-9991. In Canada, call 1-800-807-6777.

Decorator Door Panel Kits

Decorator door panels kits are available. Follow the kit instructions for installing the panels.

Order Kit Number:

White - #4378123

Black - #4378124

Biscuit - #4378125

NOTE: Door panel kits are not required for factory-installed stainless steel models.

Cabinet Side Trim Kits

Cabinet side trim kits are available to customize refrigerator to cabinet face. Follow the kit instructions for installing the side panel.

Order Kit Number:

White - #2208187W

Black - #2208187B

Biscuit - #2208187T

Stainless Steel - #2208187S

Custom Door Panels

If you plan to install custom wood panels, you will need to create the panels yourself or consult a qualified cabinet maker or carpenter. See dimensional drawings for panel specifications.

IMPORTANT: Panels weighing more than the recommended weight may cause damage to your refrigerator. Refrigerator door panel should not exceed 28 lbs. (12.7 kg). Freezer door panels should not exceed 21 lbs. (9.5 kg).

You can create panels by screwing or gluing wood panels to ¹⁄₄ in. (6.35 mm) plywood backing or by using ³⁄₄ in. (19.05 mm) stock with routed edges.

	153/8"		193/32"
1	(39.1 cm)		(48.5 cm)	1
		233/4"
		(60.3 cm)

6715/16"

153/8"(172.5 cm)

(39.1 cm)

2913/16"

(75.7 cm)

1. ¹⁄₈ in. x ¹⁄₈ in. (3.2 x 3.2 mm) chamfer

4