AdjusttheDoors

Door Closing

Your refrigerator has two front adjustable rollers – one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator's tilt using the instructions below.

1.Remove the base grille. See the Base Grille graphic in

“Refrigerator Doors.” The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side.

2.Use a screwdriver to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.

3.Open both doors again and check to make sure that they close as easily as you like. If not, tilt the refrigerator slightly more to the rear by turning both leveling screws to the right. It may take several more turns, and you should turn both leveling screws the same amount.

4.Replace the base grille.

Align Doors

If the space between your doors looks uneven, you can adjust it using the instructions below:

1.Pry off the top hinge cover.

2.Loosen the top hinge screws using a ⁵⁄₁₆" socket or wrench.

3.Have someone hold the door in place or put a spacer between the doors while you tighten the top hinge screws.

4.Replace the top hinge cover.

REFRIGERATOR USE

Using theControls

For your convenience, your refrigerator controls are preset at the factory. When you first install your refrigerator, make sure that the controls are still preset to the mid-settings as shown.

NOTE: To turn your refrigerator off, turn the refrigerator control to the word OFF or until the word OFF appears. Your product will not cool when the refrigerator control is set to OFF.

Mid-setting “3”

Mid-setting “3”

IMPORTANT:

Give your refrigerator time to cool down completely before adding food. It is best to wait 24 hours before you put food into the refrigerator.

If you add food before the refrigerator has cooled completely, your food may spoil. Adjusting the Refrigerator and Freezer Controls to a higher (colder) than recommended setting will not cool the compartments any faster.

Adjusting Controls

The mid-settings indicated in the previous section should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.

If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked.

If you need to adjust temperatures, use the settings listed in the chart below as a guide. On models with two controls, adjust the refrigerator temperature first. Wait at least 24 hours between adjustments and then recheck the temperatures.

CONDITION/REASON:

ADJUSTMENT:

 

 

REFRIGERATOR too warm

REFRIGERATOR or

 

TEMPERATURE Control one

 

setting higher

 

 

FREEZER too warm/too

FREEZER or TEMPERATURE

little ice

Control one setting higher

 

MAX ice production switch

 

 

REFRIGERATOR too cold

REFRIGERATOR or

 

TEMPERATURE Control one

 

setting lower

 

 

FREEZER too cold

FREEZER or TEMPERATURE

 

Control one setting lower

 

 

9

Page 9
Image 9
Whirlpool 2314473B warranty Refrigerator USE, AdjusttheDoors, Using theControls, CONDITION/REASON Adjustment

2314473B specifications

The Whirlpool 2314473B is a highly innovative appliance component that serves as a vital part of several Whirlpool refrigerators. Designed for enhancing the performance and convenience of refrigeration, this component boasts a host of versatile features and advanced technologies that set it apart in the marketplace.

One of the main features of the Whirlpool 2314473B is its exceptional compatibility with a wide range of refrigerator models. This compatibility ensures that users can easily replace or upgrade their refrigerator components without any hassle. The robustness of this part contributes to the overall longevity and efficiency of the refrigerator, making it a worthwhile investment for homeowners looking to maintain their appliance for years to come.

In terms of technology, the Whirlpool 2314473B incorporates advanced materials that promote durability and resistance to wear and tear. This technological edge enhances its performance under various conditions, offering reliability and efficiency that consumers can count on. The design also facilitates optimal airflow within the refrigerator, ensuring that food items retain their freshness and taste for longer periods. Efficient cooling is critical in food preservation, and the Whirlpool 2314473B excels in maintaining ideal temperatures throughout the appliance.

Another noteworthy characteristic of the Whirlpool 2314473B is its user-friendly installation process. The component comes with clear instructions that make it easy for even those with minimal DIY experience to install it correctly. This accessibility empowers homeowners to take charge of their appliance maintenance, reducing dependence on professional service providers.

Furthermore, the Whirlpool 2314473B showcases energy-efficient performance that aligns with contemporary energy-saving standards. By promoting effective energy usage, this component contributes to lower utility bills and a reduced carbon footprint, making it an environmentally conscious choice for consumers.

In summary, the Whirlpool 2314473B stands out as an essential component for Whirlpool refrigerators, equipped with features like compatibility, advanced materials, and efficiency. Its user-friendly installation process and energy-efficient performance further enhance its appeal, making it a top choice for anyone looking to ensure their refrigerator operates at peak efficiency. Investing in the Whirlpool 2314473B not only improves the functionality of the appliance but also promotes sustainability, making it a smart addition to modern kitchens.