l If your machine has a slide Load Size Selec- tor, you may set the load size anywhere on or between the small and ex large settings.
To change the load size setting after the washer has started to fill, move the Selector to the desired new setting.
NOTE: If your washer has RESET on the Load Size Selector, change the load size selection by first moving the Selector to RESET, then to the new load size.
Load size tips
l
l
l
Items should move freely in the washer. Do not overload the machine or select a load size that is too small for the wash load.
Use a large load size setting for best results with permanent press clothes.
Reduce wash time when using a small load size setting. Loads with only a few small items need less wash time.
Selecting wash-rinse temperatures
Your washer has a knob, CLEAN TOUCH* or push button Water Temperature Selector. Match the water temperature to the type of fabric and soils being washed. The top temperature is the wash water and the bottom temperature is the rinse water.
Water temperature tips
l Use warm wash water with the Permanent Press, Knits Gentle and Woollens cycles. l Always use cold rinse water for permanent
press fabrics.
l For heavily soiled permanent press or knit clothes, prewash or presoak before washing in warm water.
See the “Water usage guide” on page 18 for more information.
Knob selector | CLEAN | TOUCH selector- | |
| an indicator | appears | |
| above | the | water |
| temperatures | selected | |
Push button selector
Selecting a cycle and time
You will find information you need to help youJ make correct cycle selections in this section.
l
l
Pages
Page 10: Use this page to help you under- stand what happens during a wash cycle.
Cycles may vary with model
