Whirlpool 3360462 warranty OperatingYour Washer, Before starting your washer, This Section

OperatingYour Washer

In This		Section			Page
Before starting			your	washer	.5
Starting	or	stopping		your washer	.5
Selecting	a load		size	.........................................	.5
Selecting	wash-rinse			temperatures	.6

					Page
Selecting a cycle			and	time	.............................. 6
Using	rinse	and	spin	.......................................	8
Using	drain	and	spin	......................................	.8
What	happens in each			cycle	.......................... .9

Operating your washer properly assures maximum washing efficiency. This section gives you important information to help you to select a cycle, time, and temperature for your wash load.

Before starting your washer

Add measured detergent. Then place a sorted load in the washer before starting. See page 11 for additional “Beforeyou wash” information.

NOTE: If your washer has a Consumer Buy Guide, remove it and place it in your Use and Care Guide.

Starting or stopping your washer

Starting your washer:

1.Push in the Cycle Control Knob and turn it clockwise. Stop when the indicator on the knob’s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time.

2.Select a load size and water temperature.

3.Pull out the Cycle Control Knob.

Refer to pages 6-9 for additional information to help you make selections.

Stopping and restarting your washer:

l

l

To stop the washer at any time, push in the Cycle Control Knob.

To restart the washer, close the lid (if neces- sary) and pull out the Cycle Control Knob.