Using the fabric softener dispenser
1.Add detergent and load clothes into the basket.
2.Pour liquid fabric softener into the dis- penser using the amount recommended on the package. Avoid dripping or spilling any fabric softener on the load.
3.Dilute fabric softener with warm water. Fill dispenser with warm water until liquid reaches the opening.
4.Start the washer. Diluted fabric softener will be added to the load during the final rinse.
NOTE: Do not stop the washer before the rinse part of the cycle begins. Staining can occur.
5.Flush dispenser periodically with warm water.
NOTE: Do not wash clothes with this dispenser removed. Do not add detergent or bleach to dispenser. The dispenser is for liquid fabric softener use only.
Adding liquid chlorine bleach
Always measure liquid chlorine bleach. Do not guess. Never use more than 250 mL (1 cup) for a full load. Use less with lower water level settings. Follow manufacturer’s directions for safe use. Use a cup with a pouring spout to avoid spilling.
1.Let the washer fill and begin agitating the load.
2.Add bleach to wash cycle so it can be removed in the rinse cycle. Pour bleach around agitator, not directly on load.
l
l
Follow directions on care labels. Do not use chlorine bleach on wool, silk, spandex, acetates, or some flame- retardant fabrics.
When soaking with chlorine bleach, add detergent to soak water.
NOTE: Undiluted bleach will damage any fabric it touches. The damage appears as rips, holes, tears, or colour loss and may not show up until several washings later.
11
