If You Need Assistance

Or Service

1. Before calling for assistance .. .

Is the power cord plugged in?

Is lint screen clogged with lint?

PYIs exhaust-duct or outside exhaust hood clogged with lint?

Have you blown a fuse or tripped the circuit breaker?

If you need more help, check the chart below.

PROBLEM Dryer will not run

Dryer will not heat

Drying time too long

CHECK THE FOLLOWING

Is the power cord firmly plugged into a live circuit with proper voltage?

Has a household fuse blown or circuit breaker tripped? Has a time-delay fuse been used?

Is the dryer door firmly closed?

Did you firmly push the Start Button?

Are the controls set in an ON position?

Is the cycle in the last few minutes? (There is no heat during that time.)

Has a household fuse blown or circuit breaker tripped? Has a time-delay fuse been used?

If you have a gas dryer, are the valves open on both the dryer and the supply line?

Is your lint screen clean? (See the ‘Slow drying” section of the table on page 17 for additional information.)

Is your exhaust duct or outside exhaust hood clogged with lint?

18

Page 18
Image 18
Whirlpool 3401011 warranty If You Need Assistance, Before calling for assistance, Dryer will not heat Drying time too long