Lint screen
Clean the lint screen before each load. A screen blocked by lint can
increase drying time and may be a FIRE HAZARD
Open the Ild and pull the lint screen straight out
DO NOT run the dryer with the lint screen loose,
damaged or missing.
0Doing so can cause over-
heating, can damage fabrics and can be a FIRE HAZARD.
ROLL the lint off the icreen with your fingers
DO NOT rinse or wash the screen
Push the screen firmly back into place
Lint removal
Lint can gather Inside the dryer and create a fire hazard This lint
should be removed every 2 to 3 years, or more often, depending on dryer usage.
I | Heater Box | \\ | /’ I |
1’: | Thermostats | 1’ | fh |
|
| Heat | Element |
ELECTRIC DRYERS
Cleaning should be done
0 l Avoid electrical shock hazard - unplug power supply cord or turn off
electrical power.
l Avoid injury or damage - do not put hands inside cabinet.
l Make sure dryer is cool.
only by a qualified person.
1. Remove back panel
2. Avoid damaging wires or ther- mostats
3.Remove lint from shaded area - see art - with a soft brush or
vacuum cleaner
4.Replace panel, reconnect and re- level drver
