Slide the chassis into the cabinet. Install the cabinet seal (accessory part) between the cabinet and the frame/wall.
8.Reinstall the shipping bracket and attach with screws (2).
9.Reconnect the green and yellow grounding wire.
Electrical Shock Hazard
Connect ground wire when unit is in cabinet.
Failure to do so will result in electrical shock.
Remove
Rotate the front panel downward until it fits snugly between cabinet side flanges. Secure front panel with 2
NOTE: Make sure the Exhaust Door Control lever is between the frame and the first air discharge louver before securing front panel with screws.
13