Whirlpool 6ED22ZR Changing the control, Settings, Condition, Reason Recommended Control

3.Give the refrigerator time to cool down completely before adding food. This may take several hours.

The settings indicated above should be correct for normal, household refrigerator usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm. If you need to adjust these settings, see “Changing the control settings” below.

NOTE: The Automatic Exterior Moisture control continuously guards against moisture build-up on the outside of your refrigerator cabinet. This control does not have to be set or adjusted.

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:

Refrigerator section too warm

Freezer section too warm

Refrigerator section too cold

Ice not made fast enough

Both sections too warm

REASON:							RECOMMENDED
							CONTROL	SETTINGS:
l	Door	opened			often		Refrigerator	4
l	Large	amount			of food added		Freezer	A
l Room temperature too warm
l	Door	opened			often		Refrigerator	3
l	Large	amount			of food added		Freezer	C
l Very cold room temperature
	(can’t	cycle		often		enough)
l	Controls		not	set		correctly	Refrigerator	2
	for your		conditions				Freezer	B
l	Heavy ice usage						Refrigerator	3
l Very cold room temperature							Freezer	C
	(can’t	cycle		often		enough)
l	Door	opened			often		Refrigerator	4
l	Large	amount			of food added		Freezer	B
l Very warm or very cold room
	temperatures

8