Whirlpool 3ET18RK, 6ET18RK, 3ET18DK BeforeUsingYourRefrigerator, Clean it, Front, Install properly

Models: 3ET18DK 3ET18RK 6ET18RK

1 16
Download 16 pages 8.53 Kb
Page 4
Image 4
BeforeUsingYourRefrigerator

BeforeUsingYourRefrigerator

Clean it

Clean your refrigerator before using it. See cleaning in.strucGons on page Il.

/II Right to raise; iefl to lower

Use screwdriver

Front

Plug it in

Recommended Grounding Method

A 220 or 240 Volt, 50 Hz., AC only 15 or 20 ampere fused and properly grounded electrical supply is required. It is recommended that a separate circuit serving only this appliance be provided. Use a receptacle which cannot be turned off with a switch or pull chain. Do not use an extension cord.

Install properly

1.Allow 1.25 cm (I/Z inch) space on each side and at the top of the refrigerator for ease of installation.

2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.

3.The refrigerator back can be flush against the wall.

Level refrigerator-freezer

1.Remove the base grille. (See page 9.)

2.To raise front, turn screw in direction shown.

3.To lower front, turn screw in direction shown.

4.Check with level.

5.Replace base grille. (See page 9.)

Leveling ‘screw

4

Page 4
Image 4
Whirlpool 3ET18RK BeforeUsingYourRefrigerator, Clean it, Front, Plug it in Recommended Grounding Method, Install properly