Whirlpool 6ETl6ZK manual UsingYourRefrigerator

UsingYourRefrigerator

The drawings in this book may vary slightly from your refrigerator model. They are designed to show the different features of all the models covered by this book.

NOTE: Your model may not include all the features shown.

Setting the controls

Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time:

1. Set the Refrigerator Control to 3.

Refrigerator Control

2. Set the Freezer Control to B.

Give the refrigerator time to cool down completely before adding food. (This may take several hours.) These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk

Freezer Controlor juice is as cold as you like and when ice cream is firm.

						Changing	the control settings
						If you need to adjust temperatures in refrigerator
						or freezer, use the settings listed in the chart below.
						l Adjust the Refrigerator Control first.
						l Wait at least 24 hours between adjustments.
						l Then adjust the Freezer Control if needed.
							RECOMMENDED
CONDITION:		REASON:					CONTROL	SETTINGS:
If Refrigerator		Door	opened		often		Refrigerator	4
Section is		Large	amount		of food added		Freezer	C
TOO WARM		Room temperature				too warm
If Freezer		Door	opened		often		Refrigerator	3
Section is		Large	amount		of food added		Freezer	A
TOO WARM		Very cold room temperature
		(can’t	cycle often			enough)
If Refrigerator		Controls		not set correctly			Refrigerator	2
Section is		for your		conditions			Freezer	B
TOO COLD
If ICE	isn’t	Heavy	ice usage				Refrigerator	3
MADE	FAST ENOUGH	Very cold room temperature					Freezer	A
		(can’t	cycle often			enough)
If BOTH SECTIONS		Door	opened		often		Refrigerator	4
are TOO WARM		Large	amount		of food added		Freezer	B

Very warm or very cold room temperatures