Whirlpool 8700 manual Proper Loading Continued

Proper Loading

Continued

Adjustabie S-position top rack (on some models)

You can raise or lower the rack to fit tall items in either the top or bottom rack. The high and low positions are marked on the adjuster on the side facing the center of the dishwasher.

1. Hold the top rack with one hand near the adjuster.

2. Pull the top of the adjuster lever out with the other hand.

3. Lift or lower the rack to one of the presei positions.

4. Release the adjuster lever.

5. Repeat steps 1-4 for the three remaining adjust- ers as needed. The four adjusters can be raised or lowered separately or together, as desired.

Infinite adjustable top rack (on models so equipped)

The top rack does not have to be level.

l

l

l

Raise or lower one or both sides to help fit tall

items in the top or bottom rack.	.
Turn knob clockwise to raise a side.

Turn knob counterclockwise to lower a side.

t

Lower

Bottom rack loading

Items with cooked-on or drred-on food should

be loaded in the bollom rack, with soiled surfaces facing inward to the spray.

Mixed load

l

l

l

Make sure pot handles and other ilems do not stop rotalion of eilher the upper or lower spray arm. Spray arms must move freely.

Load items so lhey do not block or cover the spray tower.

Securely place heavily soiled cookware face down in rack.

Dish load

l

l

Place plates, soup bowls, etc.. between prongs and facing inward lo the spray.

Do not place ilems directly over spray lower.

10