Removing the crispers and crisper cover
To | remove | the crispers: | Pull | out | to the | ||
1. | Slide the crisper straight out to the stop. | ||||||
stop, | lift | the | front | ||||
2. | Lift the | front. | and | pull | again. | ||
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Push up glass insert from the bottom, then slide it out with both hands.
2.Lift front of cover frame.
3.Pull cover frame up and out.
4.Remove metal cover support.
To replace the cover:
1.Replace metal cover support on wall supports in front section of cabinet.
2.Fit back corners of cover frame into notch supports on walls of refrigerator, then lower front onto metal cover support.
3.Slide back of glass insert into cover frame. Then lower front to level position.
Remove the glass insert. Lift front of cover frame, then the back.
Adjusting the crisper humidity control
You can control the amount of humidity in the
l Adjust the control to any setting between LOW and HIGH.
l LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.
l HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.
12
