8.Replace filter and hold it in place with elastic band.

9.Replace the front panel. Locate bottom of panel on the spring clips. Press down on top edge of front panel and push it toward the air conditioner to secure the upper tabs.

10.Plug in the power cord.

Cleaning the air filter

The filter is cleanable. A clean filter helps remove dust, lint, and other particles from the air. Check every 2 weeks to see if filter needs cleaning.

1.Unplug power cord.

2.Remove front panel from cabinet. (See “Cleaningthe front panel” on page 7.)

3.Remove the elastic band holding the air filter in place. Remove the air filter.

4.Clean filter by using a vacuum cleaner or, if very dirty, wash filter with warm water and a mild detergent. Air dry thoroughly before replacing. Do not use a hot air dryer on filter.

5.Replace filter, elastic band, and front panel.

6.Plug in power cord.

8

Page 8
Image 8
Whirlpool ACM122, ACM102 warranty Cleaning the air filter