IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:
Do not use an extension cord.
Unplug air conditioner before servicing.
Use two or more people to move and install air conditioner.
SAVE THESE INSTRUCTIONS
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.
Tools needed
■ | ■ | Scissors | |
| screwdrivers | ■ | Tape measure |
| Level | ||
■ | ■ | Drill and ³⁄₃₂" or smaller bit | |
|
|
Parts supplied
Check that all parts are included in parts package.
B
A
■Free movement of air in room to be cooled.
■A large enough opening for the air conditioner. Installation parts are supplied for
■Adequate wall support for weight of air conditioner. Air conditioner weighs 81 lbs (36.7 kg) to 91 lbs (41.28 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able to pass freely through the cabinet louvers.
A
D
C
E
G
A.
B.Foam seal
C.#8 x ³⁄₈"
D.#10 x ³⁄₈"
F
E. #8 x ³⁄₄"
F. Side curtains (2) G. Top channel
A. Cabinet louvers
Window installation
Window opening measurements:
■26" (66 cm) minimum to 38" (96.5 cm) maximum opening width.
■15¹⁄₂" (39.4 cm) minimum opening height.
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Check the location where air conditioner will be installed. Proper installation is your responsibility. Make sure you have everything necessary for correct installation.
The location should provide:
■Grounded electrical outlet within 4 ft (122 cm) of where the power cord exits the air conditioner.
NOTE: Do not use an extension cord.
A |
B |
A. 26" (66 cm) minimum, 38" (96.5 cm) maximum B. 15¹⁄₂" (39.4 cm) minimum
3
