Whirlpool AD25B manual Option 2--Connect Drain Hose

Option 2-- Connect Drain Hose

If you plan to run your dehumidifier continuously, you may want to attach a garden hose to the drain hose connector.

1.Use a flat-blade screwdriver to gently pry out the drain hose connector cover. Discard the cover.

A

/

J

JB

A. Drain hose connector cover

B.Bucket

2.Remove bucket.

3.Attach a garden hose to drain hose connector on the inside of the dehumidifier. Hand tighten.

A

B

A. Garden hose

B. Drain hose connector

4.Place the other end of garden hose into a floor drain. Check to see that the hose lies flat and is in the drain.

5.Reinstall bucket.

NOTES:

•To use the bucket without the garden hose, remove the garden hose. Then reinstall bucket.

•The bucket must be installed and properly aligned for the dehumidifier to operate with or without a garden hose connected.

When your dehumidifier is operating normally, you may hear sounds such as:

•Compressor sounds, which may be loud. This is normal.

•Clicking sounds when the dehumidifier or compressor turns off and on, and when the Automatic Shutoff Switch is

working.

•Air movement from the fan.