Removing & emptying water bucket | 7 |
|
|
Drain hose connection method:
(to drain water from bucket continuously)
Bucket style 1
drain hose connector cover (not on all models)
1.If your dehumidifier does not have a drain hose connector cover, go to Step 2.
If your dehumidifier has a drain hose connector cover, use a flat- blade screwdriver to remove cover from drain connector. Turn cover counterclockwise. Discard cover. It cannot be reused. Go to Step 2.
Bucket style 2
Do Not damage outside or connection will leak.
center of drain hose connector
2.Drill out only the center of the drain hose connector. Use a minimum 1/4" drill bit.
3.Attach a garden hose to drain hose connector. The garden hose should not be longer than 8 feet (2.4 m). Run other end of garden hose into a floor drain. Check that the hose lies flat and in the drain.
To use the bucket without the garden hose:
For bucket style 1:
Use a garden hose cap to seal the drain hose connector.
For bucket style 2:
Use a garden hose cap to seal the drain hose connector.
Replace drain hose connector cover.
1.Slide off the drain hose connector cover. Go to Step 2.