How to set detergent type: powder/gel/tablet (if option is available) | First time use |
In order to always ensure the best cleaning results, you NEED to set:
DETERGENT type and WATER HARDNESS.
1.Select 3rd programme (see Table of programmes - page 1)
2.Press START button for 7 seconds
3a. Check your | 3b....and set it on your dishwasher | 4. Remember to use salt and rinse |
detergent type... | using the START button | aid when needed (as indicated |
| (as per table below) | below) |
Dishwasher models
Detergent | model without |
|
|
| |
types | model with display |
|
| ||
| display |
|
| ||
|
|
|
| ||
Powder or gel | 3h 6h 9h | no symbol | add salt | add rinse aid | |
(factory setting) | |||||
|
|
|
| ||
Tablet 2 in 1 |
|
| add salt | rinse aid | |
Tablet 3 in 1 |
|
|
|
| |
|
|
| salt | rinse aid | |
Tablet All in 1 |
|
|
|
|
5.Switch off and switch on again to save setting
For models without “detergent type” option, the salt and rinse aid indicators will be lit when tablets are used.
How to set water hardness
| Switch on the appliance |
* only before the first wash or if the | - Select the 2nd programme “P2” - consult the table of programmes. |
- Press the START button for at least 5 seconds until the START indicator lamp flashes. | |
water hardness has been changed | - The water hardness setting is shown on the display (if present) or the START button flashes. |
| |
| - With each successive touch of the START button the setting increases and when it reaches 7 it returns to 1 again. |
| - The appliance must be switched off to memorise the new setting. |
|
|
1- salt reservoir
2- rinse aid dispenser
3- detergent dispenser
4- racks system
5,6,7,8- available functions on the panel
9- filters
10- spray arms
1. Ask your water supply company what | 2. ...enter this value on your dishwasher | Suggestions for detergent use | ||||
the water hardness is... |
|
|
|
| ||
|
| Dishwasher with | Dishwasher without |
|
| |
English | Water | display: count | Gel or Powder |
| ||
display: insert value | Tablets | |||||
degrees °eH | hardness | START button led | (rinse aid and salt) | |||
in the display |
| |||||
|
| flashes |
|
| ||
|
|
|
|
| ||
0 - 6.3 | Soft | 1 | 1x |
|
| |
|
|
|
|
|
| |
7 - 12.6 | Medium | 2 | 2x |
|
| |
13.3 - 18.9 | Average | 3 | 3x |
| if extra salt is | |
|
|
|
| go to step 1 | ||
|
|
|
| |||
19.6 - 25.9 | 4 | 4x | needed go to step 1 | |||
(see “Daily check”) | ||||||
26.6 - 35 | Hard | 5 | 5x |
| (see “Daily check”) | |
|
| |||||
|
|
|
|
|
| |
35.7 - 44.1 | Very hard | 6 | 6x |
|
| |
44.8 - 74.9 | Extremely hard | 7 | 7x |
|
| |
|
|
|
|
|
| |
Water hardness level is factory set for medium hard water (a number “4” is shown on the display or the START indicator lamp flashes 4 times).
Even if you use tablets which include salt, you must still add salt since such detergents are not effective enough at softening hard water.
GB
