INSTALLATION
MOUNTING THE APPLIANCE
FOLLOW THE SUPPLIED separate mounting in- structions when installing the appliance.
PRIOR TO CONNECTING
CHECK THAT THE VOLTAGE on the rating plate cor- responds to the voltage in your home.
DO NOT REMOVE THE MICROWAVE INLET PROTECTION
PLATES located on the side of the oven cavity wall. They prevent grease & food particles from entering the microwave inlet channels.
ENSURE the oven cavity is empty before mounting.
ENSURE THAT THE APPLIANCE IS NOT DAMAGED. Check
that the oven door closes firmly against the door support and that the internal door seal is not damaged. Empty the oven and clean the interior with a soft, damp cloth.
AFTER CONNECTING
THE OVEN CAN BE OPERATED ONLY if the oven door is
firmly closed.
DO NOT OPERATE THIS APPLIANCE if it has a dam-
aged mains cord or plug, if it is not work- ing properly, or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Keep the cord away from hot surfaces. Electrical shock, fire or other hazards may result.
DO NOT USE EXTENSION CORD:
IF THE POWER SUPPLY CORD IS TOO SHORT, have
a qualified electrician or serviceman in-
stall an outlet near the appliance.
THE EARTHING OF THIS APPLIANCE is compulsory.
The manufacturer will accept no responsibility for injury to persons, animals or damage to ob- jects arising from the
The manufacturers are not liable for any problems caused by the user’s failure to ob- serve these instructions.
2