Whirlpool AVM 215 BL SERVICE

SERVICE Whirlpool Europe 10.05.1995 / Page 7

Customer Service Doc. No: 4812 714 10519

Use the GRILL button to select grill operation. Set the cooking time with timer knob and start with the

START button.

NOTE: - When the Crisp or Grill function is selected, grill indicator 1 is lit. When cooking is started, grill

indicator 2 blinks.

The TIMER button starts the independent timer. The timer is initiated to 5 s, the timer symbol is dis-

played (not blinking). Display of the timer is toggled with the same button.(If the timer has been started

there is a display time out of 3 s). The timer is set with the timer knob and started with the STARTbut-

ton. 3 seconds after the timer has been started, the function that was already activatedis displayed, and

the timer symbol blinks. If the oven is in stand-by,the timer display continues (without blink). The possi-

ble time that can be set ranges from5sto9hours and 59 minutes. Eight fast beeps indicates that the

timer has counted down to zero. If the timer has been started, it can be turned offby turning the time to

zero, or by pressing the STOP button when the timer is displayed.

Two stages may be stored. The following functions are excluded:

- the Independent Timer

- Auto Defrost

- Auto Reheat

- Beverage

- Auto Defrost-Reheat

- Auto Crisp Reheat

- Auto Crisp Cook

Stage is used according to the following (starting from stand by):

a) Press STAGE. The "1" symbol is displayed. Initiate MW 750W, 5s.

b) Select function (if other than MW), power,time etc. for stage 1. (Grill selects grill mode, not combina-

tion)

c) Press STAGE.The setting above is stored in stage 1. The "2" symbol is displayed.Initiate MW 750W,

0s (shows clearly that a new stage is displayed).

d) Select function etc. for stage 2.

e) Press STAGE.Stage 2 is stored, and stage 1 is displayed. The "1" symbol is displayed. START may be

pressed directly instead.

Programming:

Select function, time, power etc. to be stored. Then press a memory button (2 s) until storage is con-

ﬁrmed by a beep. The timer maybe stored if it has not been st arted and no other function is activein the

background (stand-by).