Whirlpool CATALYST Washer Use, UnderstandingWasher Cycles, Loading, Normal Sounds, Rinse, Towels

Models: CATALYST

1 15
Download 15 pages 59 Kb
Page 5
Image 5
WASHER USE

WASHER USE

UnderstandingWasher Cycles

When a cycle is selected, the washer lid is closed, and Start is pushed, the washer fills (to the selected load size) before agitation and timing start. The washer begins agitating immediately after filling. If CATALYST® cleaning action is selected, the washer spins and sprays detergent solution for a brief period before filling with water.

During agitation, the agitator creates a continuous rollover action that provides a thorough cleaning of the wash load.

NOTES:

The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.

Follow the progress of your wash cycle with the Washing Status indicator lights.

WASH

 

RINSE

1.

Spin-Spray

1. Fill

 

(detergent

 

 

mixture)

 

2.

Fill

2. Rinse

3. Wash

3. Drain

 

selected

No agitation

 

time

 

4.

Drain

4. Spin-Spray

 

No agitation*

rinse

5.

Spin

5. Spin

When the CATALYST option is

6. Off

selected, the washer spins and

 

sprays a detergent solution for a

 

brief period prior to filling.

 

 

 

* The Permanent Press/Casual

 

cycle partially drains, fills,

 

agitates briefly, and drains.

 

 

 

Loading

Loading suggestions

For these suggested full-sized loads, set the LOAD SIZE selector to the highest setting.

SUPER CAPACITY PLUS WASHERS

Heavy Work Clothes

1 coverall

3 pair pants

3 shirts

1 overall

4 pair jeans

 

 

 

Delicates

 

3 camisoles

6 undergarments

1 quilted robe

2 sets of sleepwear

4 slips

1 child’s outfit

 

 

Towels

 

10 bath towels

14 wash cloths

10 hand towels

1 bath mat

 

 

Mixed Load

2 shirts

3 double sheets

4 pillowcases

2 blouses

8 T-shirts

8 handkerchiefs

6 pair shorts

 

Normal Sounds

Your new washer may make sounds your old one didn’t. Because the sounds might be unfamiliar, you may be concerned about them. These sounds are normal.

During washing

When you select a small load size setting, your washer has a lower water level. This can cause a clicking sound from the upper part of the agitator.

If you select CATALYST® cleaning action, you will hear a spin/ spray noise at the start of the cycle.

During drain

If water is drained quickly from your washer (depending on your installation), you may hear air being pulled through the pump during the end of draining.

After drain and before spin

When the cycle changes from draining to spinning, you may hear gears engaging.

When selecting a cycle or an option

A tone sounds whenever a selection is made. The sound level of the tones is not adjustable.

A single tone sounds whenever a selection is accepted.

Three short tones sound if an unavailable selection is made.

5

Page 5
Image 5
Whirlpool CATALYST Washer Use, UnderstandingWasher Cycles, Normal Sounds, Rinse, Loading suggestions, During washing