Whirlpool CEM2760TQ, CGM2761TQ warranty Commercial Dryer Specifications

COMMERCIAL DRYER SPECIFICATIONS

	SINGLE DRYER SPECIFICATIONS
MODEL NUMBER		CEM2760TQ▲	CGM2761TQ•
GENERAL INFORMATION		Metercase Model	Metercase Model
Stainless Steel Look Push Button console, white enamel drum,		Accepts the Following	Accepts the Following
porcelain finish top, powdered paint cabinet, front panel lock		Payment Systems:	Payment Systems:
blank factory installed, removable indoor lint filter, improved		Coin Slide	Coin Slide
meter case, 4-Way Venting		Retrofit Coin Drop	Retrofit Coin Drop
		Retrofit Card Reader	Retrofit Card Reader
		OPL	OPL
		Push-to-Start	Push-to-Start
ELECTRICAL REQUIREMENTS		3-Wire Nominal	Nominal, 120-Volt, 60 Hz.,
		240/208-Volt, 60 Hz., A.C.	A.C., Standard 15 Amps
		Standard 30 Amps Breaker/	Breaker/Fuse Branch
		Fuse Branch Circuit per Dryer	Circuit per Dryer
		(Subject to Local Codes)	(Subject to Local Codes)
MOTOR		1⁄3-HP Single Speed	1⁄3 HP Single Speed
		Motor with Built-In	Motor with Built-In
		Overload Protector	Overload Protector
		5.9 Amps Max Rating	5.9 Amps Max Rating
HEATER TYPE		ELECTRIC	GAS**
HEATER/BURNER RATING		Heater Rated at 5600 watts	22,000 BTU
(Add 500 watts approx for motor on all dryer models)			Natural Gas
OPERATIONAL AMPERAGE		Motor — 4.0 Amps
(Does not include control or gas valve)		No load	Motor — 4.0 Amps
		Heater — 23.33 Amps	No load
		@ 240-Volt 27.33 Total
DIMENSIONS		43" H*, 27" W, 28.5" D	43" H*, 27" W, 28.5" D
SHIPPING WEIGHT (EST.)		134 Lbs.	135 Lbs.
DRUM VOLUME		7.4 Cu. Ft.	7.4 Cu. Ft.

*(height at meter case top) ***(height at dryer top panel)

**Burner orifices are available for manufactured, natural, mixed and LP gas with varying BTU ratings

•LP Conversion Kit: 49572

▲Power cords on electric models sold separately

Energy information is available online at www.whirlpoolcommerciallaundry.com/products.

EXHAUST INFORMATION

All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended. Failure to properly exhaust the dryer will result in improper operation.

27" & 29" Dryer Venting Requirements

	# of 90°			2 1⁄2" Hood
	Turns	4" Hood
	Maximum Length of 4" Diameter Rigid
Metal Duct
	0	64	Ft.	58	Ft.
	1	54	Ft.	48	Ft.
	2	44	Ft.	38	Ft.
	3	35	Ft.	29	Ft.
	4	27	Ft.	21	Ft.
	Maximum Length of 4" Diameter Flexible
Metal Duct
	0	36	Ft.	28	Ft.
	1	31	Ft.	23	Ft.
	2	27	Ft.	19	Ft.
	3	25	Ft.	17	Ft.
	4	23	Ft.	15	Ft.

Dimensions are for planning purposes only. For complete information, see installation instructions packed with product.

	To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or call 1-800-NO-BELTS
	TORX is a registered Trademark of Textron Industries, Inc.
AA806028	®Registered trademark/™Trademark of Whirlpool, U.S.A. ©2008 Whirlpool Corporation. All rights reserved.	CWLL131
	Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.