Whirlpool CEM2940TQ, CGM2941TQ warranty Commercial Dryer Specifications, Exhaust Information

COMMERCIAL DRYER SPECIFICATIONS

SINGLE DRYER SPECIFICATIONS

MODEL NUMBER	CEM2940TQ††	CGM2941TQ†
GENERAL INFORMATION	Metercase Model Factory Installed	Metercase Model Factory Installed
Stainless steel look Push Button console,	Coin Slide and Coin Box,	Coin Slide and Coin Box,
white enamel drum, powdered paint finish	$1.00 Factory Preset	$1.00 Factory Preset
cabinet and top, removable lint filter,	$0–2 per Cycle,	$0–2 per Cycle,
improved meter case.
ELECTRICAL REQUIREMENTS	3-Wire Nominal 240/208V, 60 Hz., A.C.	Nominal, 120V, 60Hz., A.C., Standard 15-amp
	Standard 30-amp Breaker/Fuse Branch	Breaker/Fuse Branch Circuit per
	Circuit per Dryer (subject to local codes)	Dryer (subject to local codes)
MOTOR	1⁄3 HP Single Speed Motor with Built-In	1⁄3 HP Single Speed Motor with Built-In
	Overload Protector 5.9-amps Max Rating	Overload Protector 5.9-amps Max Rating
HEATER TYPE	ELECTRIC	GAS**
HEATER/BURNER RATING	Heater Rated at 5600 Watts	22,000 BTUh
(Add 500 watts approx for motor on all
		Natural Gas
dryer models)
OPERATIONAL AMPERAGE	Motor — 4.0-amps	Motor — 4.0-amps
(Does not include control or gas valve)	No load
		No load
	Heater — 23.33-amps @ 240V 27.33 Total
DIMENSIONS See Illustrations	42.875"H*, 29"W, 27.75"D	42.875"H*, 29"W, 27.75"D
SHIPPING WEIGHT (EST.)	147 Lbs.	147 Lbs.
DRUM VOLUME	7.0 Cu. Ft.	7.0 Cu. Ft.

*(height at meter case top) **Burner orifices are available for manufactured, natural, mixed, and LP gas with varying BTU ratings. †LP Conversion Kit: 49572 ††Power cords on electric models sold separately Energy information is available online at www.whirlpoolcommerciallaundry.com/products.

Dimensions are for planning purposes only. For complete information, see installation instructions packed with product.

Exhaust Information

All dryers require the equivalent of a 4-inch diameter exhaust duct. Rigid metal duct is recommended. Failure to properly exhaust the dryer will result in improper operation.

# of 90°	4" Hood	2 1⁄2" Hood
Turns

Maximum Length of 4" Diameter Rigid metal Duct

0	64	Ft.	58	Ft.
1	54	Ft.	48	Ft.
2	44	Ft.	38	Ft.
3	35	Ft.	29	Ft.
4	27	Ft.	21	Ft.

Maximum Length of 4" Diameter Rigid metal Duct

0	36	Ft.	28	Ft.
1	31	Ft.	23	Ft.
2	27	Ft.	19	Ft.
3	25	Ft.	17	Ft.
4	23	Ft.	15	Ft.

	From Whirlpool Corporation — A World Leader in Laundry Products
	http://www.whirlpoolcommerciallaundry.com
	TORX is a registered Trademark of Textron Industries, Inc.
	®Registered trademark/™Trademark of Whirlpool, U.S.A.
	©2008 Whirlpool Corporation. All rights reserved.
CWLL127	Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A.