Cleaning Chart
PART
Control knobs
Control panel
WHAT TO USE
Warm, soapy water and soH cloth.
Warm, soapy water or spray glass cleaner.
HOW TO CLEAN
lWash, rinse and dry well.
lDo not soak.
9 Wash, rinse and dry well.
. Follow directions provided with cleaner.
Surface unlts (Solid elements)
SoH cloth ans warm, soapy water.
Nylon or plastic scouring pad for stubborn spots.
SoH cloth and warm, soapy water.
Soapy scouring pad or scouring powder.
. Wipe off regularly when cooktop is cool.
. Do not use abraslve or harsh cleansers.
l Make sure the cooktop and the surface units are cool.
lWipe off the surface unit aHer each use.
9 Use wet soapy scouring pad on hard to remove spots. Rinse Well.
To darken surface unlts
SoH cloth and
‘Electrol dressing, (PN 814030).
After each cleaning, heat surface unit until dry
or to remove rust spots:
l Make sure surface units are cool.
9 AHer each cleaning, apply thin coat of oil to surface units, then heat for
l Follow the directions on the dressing.
NOTE: This will Improve surface unlt
appearance, but not ellmlnate dark spots.
(Trlm rlngs)
NOTE: Yellowlng of trlm of the surface units and
l Make sure surface units are cool.
l Follow directions provided with cleaner or polishing creme.
rlngs Is normal from heat pans.
*See page 8 for
9
