DRYING CABINET USE
Starting Your Drying Cabinet
The drying cabinet is used for flat or hang drying. The following is a guide to starting your drying cabinet. Please refer to specific sections of this manual for more detailed information.
1.Place laundry in the drying cabinet and close the door. See “Loading.”
2.Select the correct temperature setting and drying time for your load. See “Cycles.”
3.Turn the TIME control knob to set a drying time up to 4 hours.
4.Press START.
■Do not overload the drying cabinet. This causes wrinkling and uneven drying.
■To prevent dye transfer, allow extra spacing between noncolorfast items.
Standard loads consist of:
■2
■up to 8 long
■any combination of the two categories of items listed above
■items placed on the floor, such as boots
■flat items on the door racks, such as gloves and scarves
Airflow inside drying cabinet
Stopping Your Drying Cabinet
To stop your drying cabinet at any time:
Open the door and turn the TIME control knob to “0.”
Pausing or Restarting
To pause your drying cabinet at any time:
Open the door.
To restart your drying cabinet:
Close the door and press START.
NOTE: The drying cycle will continue from the point when the cycle was interrupted. To cancel a cycle, turn the TIME control knob back to “0.”
Loading
The drying cabinet contains 3 racks with
Loading suggestions
■Load the drying cabinet by the amount of space items take up, not by their weight.
■For optimal performance, do not place
■Longer items should be hung next to the walls and shorter items in the middle. This will increase drying efficiency.
■Fold the lower 2 racks up flat against the back of the drying cabinet to allow for longer items to be dried.
■Hang gloves, hats, scarves or other small flat items on the racks located on the door.
■Slide the hanger attachments on the top rack forward to load clothing on the hangers. Slide to the back of the rack when not in use.
Cycle and Drying Tips
Cycle tips
■Set controls for the most delicate fabric in the load.
■If you wish to extend the length of drying time, use the TIME control knob to set more drying time.
■If you wish to change the cycle setting, set the CYCLE control knob to a different setting.
Drying tips
■Follow the care label directions when they are available.
■Do not place fabric softener sheets in the drying cabinet.
■Remove items from the drying cabinet as soon as they are dry. Doing this will help decrease the dry time for any remaining damp garments.
5
