Before starting your dishwasher
1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely
2.Push door firmly when closing and it will automatically latch.
3.Run hot water at sink nearest dishwasher until it is hot. Turn it off.
Starting your dishwasher
POTS & PANS cycle...
1.Push POTS& PANSClean Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked POTS& PANS.
-POTS% PANSand NORMAL WASHCy- cles share the same spot on the dial. The Clean Selector Button determines which cycle operates.
The dishwasher will automatically start that cycle.
LIGHT WASH cycle...
1.Push LIGHTWASHClean Selector Button.
which cycle operates.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked LIGHTWASH.The dishwasher will automatlcally start that cycle.
HEAT DRY or AIR DRY?
If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part of the cycle.
If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LIGHT WASH.
2.Push up on door latch to unlatch door and stop the cycle.
3.Open the door and add the dish.
. #
CLEANSELECTORBUlTONS
NORMAL WASH cycle...
1.Push NORMAL WASH Clean Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked NORMAL WASH.
-NORMAL WASHand POTS% PANS Cy- cles share the same spot on the dial. The Clean Selector Button determines
which cycle operates.
The dishwasher will automatically start that cycle.
RINSE & HOLD cycle...
1.Push NORMAL WASH Clean Selector Button.
2.Select AIR DRYOption only.
3.Turn Cycle Control Knob clockwise to dot marked RINSE % HOLD. The dish-
washer will automatically start that cycle.
save energy, but dishes take longerto dry (over- night]
For best results, use a liquid rinse aid such as
4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amountof moisture thatcan come from the vent when restarting the cycle.
5.Press in door to latch it. The dishwasher will start where it stopped.