Whirlpool DU4000XY manual UsingRinseAgentDispenser

UsingRinseAgentDispenser

Rinse agent dispenser

Keep Ihe rinse agenl dispenser filled with a liqurd rinse agenl such as Jel-Dry.” A rinse agent greatly improves the drying of dishes by helping water flow off of them during the last rinse. A rinse agent also keeps water from forming droplets and drying as spots. A small amount of rinse agent is automalically released inlo Ihe rinse water during the final rinse of each cycle.

For best drying results, check the

dispenser periodically to see if it needs refilling.

To check dispenser

Keep rinse agent dispenser filled for

The center of the Fill lndicalor Cap will be clear when dispenser needs relilling. An “E”will also be visible inside the dispenser when the cap is removed and the dispenser is empty.

To fill dispenser

The dispenser will hold 6 ounces of rinse agent, Under normal conditions, this will last about 3 months. You do nol have to wait until the dispenser is empty to refill it, but do not overfill it.

Make sure Ihe dishwasher door is fully open

before removing the Fill Indicator Cap. Do not fill past Ihe smallest opening in the lower part of the dispenser. If you overfill, excess rinse agent can come out. This will not harm Ihe dishwasher, but could cause over-sudsing. Clean up any spilled rinse agent with a damp cloth. Replace Ihe Fill Indicator Cap and keep it tightly closed.

NOTE: Because your dishwasher is designed to use a liquid rinse agent, you do not need to use a solid or bar-type rinse agent.

R Regislered Trademark of Benckrser Consumer Products. Inc