Whirlpool DU7400XS Before starting your dishwasher, Starting your dishwasher, Selecting a cycle

Models: DU7400XS

1 16
Download 16 pages 27.54 Kb
Page 8
Image 8
Before starting your dishwasher

Before starting your dishwasher

1.Read “Important Safety Instructions” on page 2 before starting your dishwasher.

2.Spin the Upper and Lower Spray Arms to makesure nothing will stopthem from turning freely.

3.Push door firmly when closing and it will auto- matically latch.

4.Run hot water atsink nearest dishwasher until it is hot. Turn it off.

Starting your dishwasher

POTS & PANS Cycle...

1.Push POTS & PANS Cycle Selector Button.

2.Push button for option desired.

3.Turn Cycle Control Knob clockwise to line marked POTS & PANS. (POTS & PANS and NOR- MAL WASH Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.)

The dishwasher will automatically start that cycle.

LIGHT WASH Cycle...

1.Push LIGHT WASH Cycle Selector Button.

-LIGHT WASH and NORMAL WASH Cycles share the same Cycle Selector Button. The

Control Knob setting determines which cycle operates.

2.Push button for option desired.

3.Turn Cycle Control Knob clockwise to line

marked LIGHT WASH. The dishwasher will

automatically start that cycle.

CYCLE SELECTOR BUllONS

NORMAL WASH Cycle...

1.Push NORMAL WASH Cycle Selector Button.

2.Push button for option desired.

3.Turn Cycle Control Knob clockwise to line marked NORMAL WASH. (NORMAL WASH and POTS & PANS Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.)

The dishwasher will automatically start that cycle.

RINSE & HOLD Cycle...

1.Push NORMAL WASH Cycle Selector Button.

2.Select AIR DRY Option only.

3.Turn Cycle Control Knob clockwise to line marked RINSE & HOLD. The dishwasher will

automatically start that cycle.

Selecting a cycle

POTS & PANS Cycle

Maximum cleaning for cooked- or baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145°F (63’C) in both washes and the last rinse [marked *). Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

NORMAL
WASH
Cycle

 

For normal,

everyday

soiled loads.

.Iwl,m,m--

(The Energy Guide Label data is based on this cycle.] Cycle time is about 63 minutes.

LIGHT WASH Cycle

For pre-rinsed or lightly soiled loads. Cycle time is about 58 minutes.

8

Page 8
Image 8
Whirlpool DU7400XS Before starting your dishwasher, Starting your dishwasher, Selecting a cycle, POTS & PANS Cycle, Normal