Whirlpool DU7903XL manual Using DELAY START, The RESET OPTIONS Button, Selecting a cycle

Water HLating Hold Signal light DELAY STAR\TSignal light Cycle C&trol Knob

Selecting a cycle

POTS & PANS Cycle

Maximum cleaning for cooked- or baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145°F (63°C) in both washes and the last rinse (marked ‘). Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

HEAVY WASH Cycle

A double wash for heavily soiled loads. Cycle time is about 70 minutes.

NORMAL WASH Cycle

For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 60 minutes.

LOW ENERGY WASH Cycle

For pre-rinsed or lightly soiled loads. Cycle time is about 55 minutes.

RINSE 6 HOLD Cycle

For rinsing a few items to be washed one or more days later.

Cycle time is about 10 minutes.

Use AIR DRY only Do not use HI-TEMP WASHING Option.

Using DELAY START

1.Push Cycle Selector Button.

2.Push Option Selector Button for desired op- tion or options.

3.With the Control Knob pushed in, turn clock- wise to the number of hours (from 1 to 6 hours] you want the dishwasher to delay before the selected cycle starts.

4. Pull out the Control Knob. The DELAY START Signal Light will come on until the selected cycle starts.

NOTES:

lYou can add items while time is counting down. Close and latch the door. The timer will not advance if the door is unlatched.

lRINSE& HOLD and LOW ENERGY WASH Cycles can’t be delayed.

The RESET OPTIONS Button

If you want to change a selected option, push the RESET OPTIONS Button. Re-select an option, if desired.

9