CONTROL PADS

Starting your dishwasher

Four control pads and the signal lights allow you to set and check the dishwasher’s function.

When first installed, the signal lights will flash rapidly in order. The signal lights will also flash following a powerfailure. Press the CANCEL pad twice to clear the signal lights.To start the dish- washer, press the STARTpad once to display the cycle. The dishwasher is preset for the NORMAL cycle with the HEAT DRY option. If you want this cycle, press STARTagain.

To select a different cycle and/or option, just press the CYCLE pad and/or OPTIONS pad until the cycle and/or option you want is indicated by the signal lights. Each press of the pad advances the signal light to the next cycle or option. Press START to begin the cycle you se- lected. After each use, the dishwasher remem- bers the cycle and options used. The next time the display is lit up for selection, it will show the last cycle that was run.

When dishes are loaded and ready to be

washed...

1.Read “Important Safety Instructions’on page 2 before starting your dishwasher.

2.Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.

3.Push door firmly when closing and it will auto- matically latch.

4.Run hot water at sink nearest dishwasher until it is hot. Turn it off.

5.Press the STARTpad. Skip to step 7 if you want to run the cycle indicated by thesignal lights.

6.You may select a different cycle by pressing the CYCLE pad. You may select a different option by pressing the OPTION pad.

7.Press the START pad again.

Selecting a cycle

POTS & PANS

WASHING

AND

RINSING

AND

HEATING

WATER

HEATING

WATER DRYING CLEAN

Maximum

cleaning

 

for

cooked-on

,----

p-~-5

or baked-on

foods.

The

cycle time

 

 

delays while

the

dishwasher

auto-

 

 

matically

heats the

water to

145°F

 

 

(63°C) in both washes and in the last

 

 

rinse (marked *I. Cycle time** is 72

 

 

minutes

plus

the

time

needed

to

 

 

heat the

water.

 

 

 

 

 

 

 

8

Page 7 Page 9
Page 8
Image 8
Whirlpool DU9100XT Series manual Selecting a cycle, Control Pads, Washing Rinsing Heating, Heating Water Drying Clean
Page 7 Page 9

DU9100XT Series specifications

The Whirlpool DU9100XT Series dishwasher is a remarkable appliance that embodies efficiency, durability, and practicality for modern kitchens. Designed with the consumer in mind, this series incorporates a range of advanced features and technologies that enhance cleaning performance while maintaining energy efficiency.

At the heart of the DU9100XT Series is its powerful wash system, designed to tackle even the most stubborn food particles. The series is equipped with a unique spray arm configuration that ensures water reaches all areas of the dishwasher. This means dishes, pots, and pans are thoroughly cleaned in a single cycle, reducing the need for pre-rinsing and saving valuable water and energy.

One of the standout features of the DU9100XT is its Quiet Wash sound insulation, designed to minimize operational noise. This technology ensures that the dishwasher operates quietly, allowing users to carry on conversation or enjoy other activities without disturbance. The appliance operates at an impressively low decibel level, making it ideal for open-concept living spaces.

The DU9100XT Series includes a stainless steel interior that not only enhances durability but also provides better insulation and temperature retention during the wash cycle. This construction allows for improved energy efficiency, meaning that the dishwasher utilizes less water and energy while still delivering outstanding cleaning performance. Additionally, the stainless steel is resistant to odors and stains, ensuring that the interior maintains a clean appearance over time.

Another hallmark of this dishwasher series is its intuitive control panel that features a variety of wash cycle options. Users can choose from different settings, including heavy, normal, and quick wash cycles, making it suitable for any level of soiling. The addition of a delay start option is a convenience feature that allows users to set the wash cycle to begin at a more convenient time, helping manage energy usage based on peak hours.

The smart design of the DU9100XT includes a flexible loading system, with adjustable tines and a third rack option. This flexibility allows users to customize the interior layout based on the size and shape of the dishes, optimizing space for maximum capacity.

Finally, with its sleek design and modern finishes, the Whirlpool DU9100XT Series fits seamlessly into any contemporary kitchen aesthetic. It's a dishwasher that not only performs exceptionally but also complements the overall kitchen decor, making it a valuable addition to any home. With innovative features and user-friendly design, the DU9100XT Series stands out as an excellent choice for families and individuals alike.
Top Page Image Contents