Moving the meat pan...
The meat pan can be taken out and moved the same way as the shelves. Remove the meat pan first.
To remove the meat pan and cover:
1.Slide the meat pan out to stop.
2.Lift the front of meat pan.
3.Slide pan the rest of the way out.
4.Tilt cover up at front.
5.Lift up at back.
6.Pull straight out.
To replace the meat pan and cover:
1.Guide the rear hooks of cover into the slots ir shelf supports.
2.Tilt up front of cover until rear hooks drop slots. Lower front of cover to level position.
3.Replace meat pan in reverse order of removal.
Changing the light bulb...
1:mz:
,,
PUSH IN THECENTER;”
PULL DOWN.
Removing the base grille...
To remove the grille:
I
1.Open the doors.
2.Pull grille outwards as shown,
3.Do not remove Tech sheet fastened behind grille.
1.Push lightly on the top center of the light shield until the notched tab unhooks from the control panel.
2.Pull down on the shield until the tab clears the ’ control panel.
3.Lift the back hooks out of their slots.
4.Replace with a
5.Replace light shield in reverse order.
r METAL CLIPS SUPPORT TABS
,
ETA1 CLIPS \ | I |
SUPP6RT TABS
:
1.Line up grille support tabs with metal clips.
2.Push firmly to snap into place.
3.Close the doors,
Ice cube trays...
If cubes are not used, they may shrink. The mov- ing cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
? Eyt:i%oth ends. 2. Slightly twist.
