2.To start the normal ice making cycle, turn the Cycle Control Knob to “ON:’
3.To stop ice maker operation, turn Cycle Control Knob to “OFF.”
The “CLEAN” setting is used whenever solutions are circulated through the ice maker for clean- ing. Only the water pump operates at this setting.
Changing the bin door panel
You can easily change the color of the front panel on the storage bin door. Six colors are available: Black, Almond, Harvest Gold, White, Toast and Platinum.
To change panel:
_ -
1. Open the storage bin door. Remove the two screws on the top of the door, which hold the handle.
2. Loosen the screws in both of the side trim pieces.
3. Remove the handle and the handle insert.
4.Carefully slide the panels out. You will find three panels with six colors.
5.Choose the color you want to show and carefully slide the panels back into the door. NOTE: Be careful not to scratch the panels as they are inserted.
6.Replace the handle insert and tighten
the screws in both side trim pieces. Replace the handle and the screws.
Note: You can make a decorative wood front to be Y4” (6 mm) thick and 17” x ll%” (433 mm x 286 the ribs on the door insulation to allow for wood
match existing cabinets. The panel should mm). Remove the color panels and break off thickness.
