Whirlpool ED20SK manual UsingYourRefrigerator

UsingYourRefrigerator

REFRIGERATOR

Setting the controls

Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time:

1. Set the Refrigerator Control to 3.

FREDER

2. Set the Freezer Control to B.

Give the refrigerator time to cool down completely before adding food. (This may take several hours.) These settings should be about right for normal

household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like and when ice cream is firm.

Refrigerator Control adjustments range from 1 to 5. Freezer Control adjustments range from AtoC.

Changing the control settings

CONDITION:

If Refrigerator Section is

TOO WARM

If Freezer Section is

TOO WARM

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below. If you have questions, call your COOL-LINE@ serv- ice assistance number. (See page 14.)

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

				RECOMMENDED
REASON:				CONTROL	SETTINGS:
Door	opened	often		Refrigerator	4
Large	amount	of food added		Freezer	A
Room	temperature		too warm
Door	opened	often		Refrigerator	3
Large	amount	of food added		Freezer	C
Very cold room temperature
(can’t	cycle often		enough)

If Refrigerator		Controls not set correctly			Refrigerator	2
Section is		for your	conditions		Freezer	B
TOO COLD
If ICE	isn’t	Heavy	ice usage		Refrigerator	3
MADE	FAST ENOUGH	Very cold room temperature			Freezer	C
		(can’t cycle often enough)
If BOTH SECTIONS		Door opened		often	Refrigerator	4
are TOO WARM		Large amount		of food added	Freezer	B
		Very warm or very cold room
		temperatures