Install properly.. . 1 Allow %” [ 2 cm] space on each side and at top for
ease of Installation
2. If the refrigerator is to be in a corner, keep 1%
inches (3.1 cm) between the wall and the side of
the refrigerator so there IS room to open the doors
wider
3 The refrigerator back can be flush against the
wall
Level refrigerator-freezer.. . Use Screwdriver
Right to Raise;
Lett to Lower
I, Remove base grille (see page 7 1.
2. To raise front, turn each screw to the right
3. To lower front, turn each screw to the left.
4 Check with level
Remove sales labels.. . Remove the Consumer Buy Guide label and other
inslde labels before using the refrigerator. Any glue
left can be taken off with rubbing alcohol.
Clean it.. . Clean your refrigerator before using it. See clean-
ing lnstructlons on page 8.
//
Plug it in...grounding type
wall receptacle
‘3 -
Refrigerator
Power Cord Recommended
Grounding Method
A 115 Volt, 60 Hz, AC only, 15 or 20 ampere fused
electrical supply
IS
required It
IS
recommended that
a separate circuit serving only this appliance
be provided.
Do not use an extension cord. Use Q receptacle
which cannot be turned off with a switch or pull
chain. See individual electrical requirements and
groundtng instruct/on sheet In your literature
package
A